Avaya IP Office 500V2 Control Unit

The IP500 V2 control unit is compatible with all IP500 base extension and Voice Compression Modules (VCM) cards as well as all external IP500 expansion modules. IP500 V2 is a stackable unit with an optional 19" rack mounting kit and an optional wall mounting kit for smaller configurations. 

Avaya IP Office 500V2 Control Unit Features

• 4 slots to house a mixture of extension cards and VCM cards:
• Digital Station 8 card. Supporting IP Office digital telephones
• TCM8 Station card supporting select Nortel digital telephones (IP500 V2 control unit only)
• Phone 2 and Phone 8 cards
• VCM32 and VCM64 cards
• 4-Port Expansion card
• ETR6 port phone card (IP500 V2 only, North America only)
• Combination Card with 10 VCM channels, 4 analog trunks, 6 Digital Station (DS) and 2 Phone ports
• Combination Card with 10 VCM channels, 2 BRI trunk interfaces (4 channels), 6 Digital Station (DS) and 2 Phone ports
• Optional trunk card support:
• Analog Trunk Module 4 card
• BRI4 and BRI8 cards (2 x 2B D and 4 x 2B D channels respectively)
• Single and Dual Universal PRI cards
• IP500 Legacy Card Carrier: this card allows up to two IP400 Trunk or VCM Cards to be used with the IP500 control unit
• 2 Slots for SD cards (System and optional) – System SD card is required for system operation as well as licensing of optional features and storage for embedded voicemail in Essential Edition.
• 9-pin RS232 DTE Port for maintenance.
• Support for up to 12 IP500 Expansion Modules:
• Phone modules (16, 30)
• Digital Station modules (16, 30) supporting IP Office telephones with RJ45 connector
• Digital Station modules (16A, 30A) supporting Nortel telephones with RJ21 connector
• Analog Trunk Module 16
• IP500 So8 module
• IP400 expansion modules (not WAN3 10/100 or Network Alchemy modules)
• External output socket supporting two relay on/off switch ports, e.g. for door entry systems